wall mount setups should automatically be build with framing stud spacing in.mind
Did you push the thumbtacks all the way in? I bet you didn’t.
Needs more toggles.
There are servers in this state all around the world and they stop working as soon as anyone tries to fix them so they’re kept just like this.
Phew. Good thing they attached those safety cables!
“They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.
Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?
Almost forgot walls are made out of nothing in North America
Yeah, yeah. “Americans are, stupid they build houses out of wood and paper.”
Y’all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn’t need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don’t see beautiful “art” like this in bathrooms and kitchens in the U.S.:



As a European in always flabbergasted whenever a bunch of cardboard houses are shredded to bits by hurricanes in the US. If only there was a way to avoid that.
Haha. You know, this is more true than false, because they are mostly void space.
I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.
Toggle bolts. Not the shitty “spring toggles” – actual toggle bolts like Hilti’s HTB-2, Cobra’s “FlipToggle”, or Toggler’s “SnapToggle”. They’re strong and don’t drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to “flip”, and removing them is more of a chore.
These things:

I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.
These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

Everything reminds me of her…
lol I’m not the only one.
I’m partial to snaptoggles myself
EZ Anchors all the way

100% will never use these again because when they do pull out partially, like from using them to anchor cat perches, they just spin, and you have to make a big hole to remove them.
Not worth it.
💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.
But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.
You’re saying we need a bare stud to make the hole bigger.
Are you’re sure you’re not the wife? With all the hammering with studs and all.
I’m sorry I can’t help it.
My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall…
I love em
Wh… what? You drill them in… why the hell would you hammer them in???
Because you’re his wife silly.
Yeah, cannedtuna! You’re sc00ters wife!
I use these because you can take them out and reuse them, and the screw comes out and goes back in.
Toggle bolts are stronger, but you can’t take the screw all the way out without losing the back piece, that limits their utility somewhat.
That was my first thought, “who thought drywall would hold up a wall mounted rack?!” There’s a reason they put plywood in there
So it’s plywood screwed to stud and rack screwed to plywood?
That is what I usually see. But for network equipment. Not servers. Those should always be in floor racks
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
Good thing you didn’t have bed budge.
My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all… Quick tug on a strap, wiggle the object a little, “yup, looks good!”
As long as you say “that’s not going anywhere”, it’ll definitely hold
You have to twang all the ropes while incanting.
I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I’d rather it dodn’t shift around and definitely don’t want the wind to suck it up and possibly out on the highway.
Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed…
Same but it was a golf cart with a lift kit and not the stock speed controller
deleted by creator
If one will hold it, then 4 is good insurance.
That’s always been my approach to tying/strapping things down, whether on a roof or trailer.
I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.
Flex in materials is a bitch.
Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.
Lags into studs is how I mount my safes. Nothing else will do.
Trainee: “Well anyway, I’m gonna clock out. See you on Monday.”
And they should, their free time is theirs.
Similarly, the first computer bug:

At least the firewall is still up.

Yes toggles are insufficient for this load, but I think the fixtures here are actually my nemesis: screw in plugs.
They’re a flawed premise and really only appropriate for hanging a postcard on brand new gyprock.
The thread is supposed to slice through the gyprock and provide the hold. Gyprock / drywall gets brittle with age so screwing one of those bad boys in just makes it all crumble, even if it doesn’t actually fall apart. The fixture has no strength at all.
Toggles are fine for a curtain rail. Anything else is a lug in a stud.
Personally I only trust good 1/4”-1/2” plywood backing for drywall or some solid redheads for block.
Maybe we have different products here. We don’t call it dry wall and ours doesn’t have ply. It’s just “gyprock”. Analogous to plaster but it does have a limited amount of strength: enough for small wall hangings anyway.
Well, gypsum or drywall is also known as sheet rock. Plaster is mesh with plaster over it. Plywood is wood board.
Drywall can hold weight, but it really depends on how you spread that weight. Putting a 1/2” wood backing really helps spread that weight out when fastened to the studs.
Plaster I don’t trust not to blow out.
Why would you just put the rack on the floor? I would put it on wheels for ease of access but come on bro>?>?>>
Usually for ventilation purposes
No sides open top, its perfectly ventilated unless the room doesn’t have the tonnage to support the heat load. My guess is they thought it looked slick mounted to the wall. And here we are, gravity is a harsh mistress.
I have a similar rack in my house, but even I was smart enough to mount it on plywood.
Absolutely, I liked using birch laminate plywood to mount these racks. Yes expensive but it wasn’t my money and I’m SUPER lazy. I do it right so I only do it once.
I’m cheap, so I couldn’t justify better than BC (or maybe even CDX?) for the back of a closet, LOL
I had to go with white oak ply since everything else was severely cupped.
Its really the companies fault for having walls.
Eh? Looks okay. Even without dust.
This is a very anxiety inducing picture isn’t it
deleted by creator














